The stainless steel heat exchange tube is one of the elements used in the heat exchanger, and its function is to exchange heat between the two media. So do you know what kind of characteristics it has? Mingxin Stainless Steel will list a few points for you below.
1. Small size and high efficiency
The heat transfer of stainless steel heat exchange tubes is carried out in a thin plate of 0.5 mm, so the efficiency is high, and the heat transfer efficiency after series connection is over 90%.
2. Long service life
The structure is simple, and there are no driving parts and aging factors.
3. Not easy to scale
The exhaust gas flows through the upper and lower sides of the plate in a laminar flow mode. At the same time, because it forms an angle of 60° with the gas inflow surface, it will not cause turbulent flow, so it is not easy to scale.
4. Easy to clean
Although it is not easy to have dust, but after long-term use, when the amount of dust in the environment is particularly large (above 100mg/m3), the time setting of the automatic cleaning device can be set, and cleaning can be performed at any time within an appropriate interval during operation.
5. Noise reduction effect
The thin plate is able to absorb wind pressure, so the noise is lower than 40Db, so it is noise-proof.
6. No pollution
It is used for full welding to separate the two media, so the exhaust gas will not enter the supply air, and there will be no pollution.