Do you know how to install stainless steel instrument tube? Below Mingxin shares the installation method of the stainless steel instrument tube for your reference.
1. Before the stainless steel instrument tube is installed, the stolen items in the tube should be removed mechanically, and then the inside of the tube should be blown clean with compressed air.
2. The compressed air should be clean and dry. When using the air test tube, attention should be paid to the change of air pressure in the test tube due to temperature changes. The test should be performed after the temperature of the tube is equal to the ambient temperature.
3. Care should be taken to avoid accidental heating and cooling during the test.
4. During the hydraulic test, the irrigation water should enter from the lower point, and the air in the pipeline should be discharged along the highest point.
5. The static pressure between the highest point and the lowest point should be considered. Especially for the test of low-pressure pipelines, air-tightness testing should be done with air instead of water for low-pressure pipelines lower than 0.1Mpa.
The above is the installation method of the stainless steel instrument tube.