Mingxin will share with you some processing requirements for stainless steel heat exchange tubes!
By: mxgy,
Stainless steel heat exchange tubes also have requirements for processing, and many aspects require personnel attention. In today’s article, Mingxin will share with you the processing requirements of stainless steel heat exchange tubes.
Zhejiang Max Stainless Steel Co., Ltd. is a modern stainless steel pipe manufacturing enterprise integrating scientific research, production and sales. The company selects Walsin Lihwa and Yongxing Special Steel base materials as the leading materials for the production of high-quality stainless steel, mainly producing seamless pipes, bright and annealed pipes, heat exchange pipes, pipe fittings, flanges and other products.
1. Choose grooved plastic-coated pipe fittings as the original.
2. The length of the connecting pipe section should be the net length between the two ports of the pipe section minus 6~8mm material, leaving a gap of 3~4mm between each interface and stamping the serial number.
3. When cutting the pipe with machinery, the section should be perpendicular to the axis of the pipe. The allowable deviation range is: ①When the pipe diameter is not greater than 100mm, the deviation is not greater than 1mm; ②When the pipe diameter is greater than 125mm, the deviation is not greater than 1.5mm.
4. The end face of the outer wall of the wear-resistant steel-plastic composite pipe should be rounded with 1/2 wall thickness by machining.
5. Use a special rolling groove machine to press the groove.
1) When grooving, the pipe section should be kept horizontal, and the front of the steel pipe and the grooving machine should be 90°.
2) When grooving, it should be done slowly, and the groove depth should meet the requirements.
6. The outer end of the pipe in contact with the rubber sealing ring should be flat and smooth, and the rubber ring should not have defects such as scratches.
The above is some knowledge about the processing of stainless steel heat exchange tubes.
CNMAX has always taken “quality assurance, professional service, and customer satisfaction” as its corporate purpose, and its pioneering, pragmatic, and innovative entrepreneurial spirit will continue to contribute high-quality stainless steel products to the society, complement each other’s advantages, and work together to create a better world.
Mingxin will share with you some processing requirements for stainless steel heat exchange tubes!
By: mxgy,
Stainless steel heat exchange tubes also have requirements for processing, and many aspects require personnel attention. In today’s article, Mingxin will share with you the processing requirements of stainless steel heat exchange tubes.
Zhejiang Max Stainless Steel Co., Ltd. is a modern stainless steel pipe manufacturing enterprise integrating scientific research, production and sales. The company selects Walsin Lihwa and Yongxing Special Steel base materials as the leading materials for the production of high-quality stainless steel, mainly producing seamless pipes, bright and annealed pipes, heat exchange pipes, pipe fittings, flanges and other products.
1. Choose grooved plastic-coated pipe fittings as the original.
2. The length of the connecting pipe section should be the net length between the two ports of the pipe section minus 6~8mm material, leaving a gap of 3~4mm between each interface and stamping the serial number.
3. When cutting the pipe with machinery, the section should be perpendicular to the axis of the pipe. The allowable deviation range is: ①When the pipe diameter is not greater than 100mm, the deviation is not greater than 1mm; ②When the pipe diameter is greater than 125mm, the deviation is not greater than 1.5mm.
4. The end face of the outer wall of the wear-resistant steel-plastic composite pipe should be rounded with 1/2 wall thickness by machining.
5. Use a special rolling groove machine to press the groove.
1) When grooving, the pipe section should be kept horizontal, and the front of the steel pipe and the grooving machine should be 90°.
2) When grooving, it should be done slowly, and the groove depth should meet the requirements.
6. The outer end of the pipe in contact with the rubber sealing ring should be flat and smooth, and the rubber ring should not have defects such as scratches.
The above is some knowledge about the processing of stainless steel heat exchange tubes.
CNMAX has always taken “quality assurance, professional service, and customer satisfaction” as its corporate purpose, and its pioneering, pragmatic, and innovative entrepreneurial spirit will continue to contribute high-quality stainless steel products to the society, complement each other’s advantages, and work together to create a better world.
