Stainless steel heat exchange tubes are widely used in daily life and are very popular among users. As an element in the heat exchanger, it is mainly used for heat exchange between the two media. Next, Mingxin will introduce the six main characteristics of stainless steel heat exchange tubes for you.
【Small size, high efficiency】
The heat transfer of stainless steel heat exchange tubes is carried out in 0.5mm thin plates, so the efficiency is high, and the heat transfer efficiency after series connection is over 90%.
【long lasting】
The structural design is simple, and there are no driving parts and aging factors.
【Not easy to scale】
The exhaust gas flows through the upper and lower sides of the plate in a laminar flow mode. At the same time, because it forms an angle of 60° with the gas inflow surface, it will not cause turbulent flow, so it is not easy to scale.
【Easy to clean】
Although the stainless steel heat exchange tube is not easy to scale, but when it is used for a long time and the amount of dust in the environment is particularly large (above 100mg/m3), it can be set by the time of the automatic cleaning device, and it can be carried out at any time within an appropriate interval during operation. cleaning.
【Muffling effect】
The thin plate can absorb wind pressure, so the noise is lower than 40Db, which can prevent noise.
【No pollution】
It is used for full welding to separate the two media, so the exhaust gas will not enter the feed air, and there will be no pollution.
The above is an introduction to the six characteristics of stainless steel heat exchange tubes.